Instructions / Assembly

Figure 5.25

5) Wait for DTC to trigger recording or press OK to start recording.

(Figure 5.26)

 Drive till a DTC is detected when DTC Trigger is selected. If no

DTCs are detected, press ESC to exit recording.

Figure 5.26

 The number “x/x...” to the upper right corner of the screen

indicates the maximum frames that can be recorded and the

number of recorded frames.

6) The scan tool keeps recording PID data until user presses the

ESC button, selected memory location is full, or it completes

recording. A message prompting to playback data shows on the

screen.

…….Recording…. 5/46 …..

DTC_CNT 0

FUELSYS1 0L

FUELSYS2 -- ?

LOAD_PCT(%) 0.0

ETC(℃) -40

SHRTFT1(%) 99.2

………………….DTC Trigger……………..

Waiting for DTC to

trigger recording…

Press [ESC] to exit