Instructions / Assembly

lamps are functioning properly.

1) Use the UP/DOWN scroll button to select LED Test from the

Tool Self-test menu, and then press the OK button.

2) In the LED Test menu, use the UP/DOWN scroll button to

select one or more LED lamps to check. The LED should turn

on or off according to the selected commands.

Figure 3.11

3) When completed, press the ESC button to exit.

Update Mode

This function allows you to update the scan tool software and DTC

library through a computer.

 To update your scan tool, you need the following items.

AutoLink



AL439

A PC or laptop with USB ports

A USB cable

1) Download the programs in our website: www.auteltech.com to

be updated to your computer.

2) Run the MaxiLink Tool Kit in your computer. (Figure 3.12)

3) Connect the scan tool to your computer through the USB cable

provided.

LED Test 1/3

RED LED ON

YELLOW LED ON

GREEN LED ON