Instructions / Assembly

Emissions tests vary depending on the geographic or regional area in

which the vehicle is registered. So the scan tool provides a more

flexible way to meet different standards, which allows the user to

select 0, 1, 2, 3 „not complete‟ monitors in test.

4) Reset Factory Default

From Configure Monitors screen, use the UP/DOWN scroll button to

select Reset Factory Default, and press the OK button.

It will restore the default configuration settings in the Configure

Monitors menu, and delete any customized settings. In this case,

Spark IGN Required Monitors and Compression IGN Required

Monitors will include all the available monitors, and the Allowed

INC Monitors will be set to 1.

The tool will display an information message to ask for your

confirmation. Select Yes to proceed and No to exit without change.

Unit of Measure

 Metric is the default measurement unit.

1) From System Setup screen, use the UP/DOWN scroll button to

select Unit of Measure and press the OK button.

2) From Unit of Measure screen, use the UP/DOWN scroll button

to select the desired unit of measurement. (Figure 3.6 )

Figure 3.6

Unit of Measure 1/2

 English

 Metric