Instructions / Assembly

17
6) To exit to Main Screen, press the ESC button.
3.8 System Setup
The scan tool allows you to make the following adjustments and
settings:
1) Language: Selects the desired language.
2) Configure Monitors: Sets the monitors you want to test.
3) Unit of measure: Sets the unit of measure to English or Metric.
4) Key Beep Set: Turns on/off beep.
5) Status Beep Set: Turns on/off the I/M Readiness Status beep.
6) Tool Self-test: Checks if the LCD display, LED lamps and
keyboard are working normally.
7) Update Mode: Accesses the Update Mode.
8) Tool Information: Views the important information of the tool.
 Settings of the unit will remain until change to the existing
settings is made.
To enter the Setup menu
From the Main Screen: Use the UP/DOWN scroll button and
LEFT/RIGHT scroll button to select Setup, and press the OK button.
Follow the instructions to make adjustments and settings as described
in the above setup options. (Figure 3.3)
Figure 3.3
System Setup 1/8
Language
Configure Monitors
Unit of Measure ?
Key Beep Set
Status Beep Set
Tool Self-test
Tool Information