Instructions / Assembly

16
2) From DTC Lookup screen, use the LEFT/RIGHT button to
move to the desired character, use the UP/DOWN button to
change selected digit/character and press the OK button to
confirm. (Figure 3.2)
Figure 3.2
3) View the DTC definition on screen. When DTC definition covers
more than one screen, use the LEFT/RIGHT button or
UP/DOWN button to view additional information on
previous/next screens.
 For manufacturer specific codes, you need to select a vehicle
make on an additional screen to look for DTC definitions.
 If definition could not be found (SAE or Manufacturer
Specific), the scan tool displays “Please refer to vehicle
service manual!”
 For code breaker information, you need to press the “?” Help
button.
In the Code Breaker screen, there are three options to assist user
to understand DTC more: System Description and Quick Check
to read detailed description of DTCs, General Notes to view
helpful repair information of DTCs.
4) To view previous or next DTC in the built-in DTC library, use the
LEFT/RIGHT button.
5) To enter another DTC, press the ESC button to return to previous
screen.
DTC Lookup
P 0 0 0 1
Left
Right
Change digit
OK
Confirm
ESC
Exit
［ ］［ ］- Change Digit
［ENTER］- Confirm
［ESC］- Exit