Instructions / Assembly

15
 Using vehicle DLC
If you want to charge the tool with vehicle DLC, the detailed
instructions are described as above (refer to the Power on
instructions).
Once connected, the Li-ion battery will be fully charged in about 2.5
hours. You can disconnect and use the tool before the battery is fully
charged. You don't have to wait until the battery is completely empty
before charging it again.
The battery stops charging when it's full, so you don't have to worry
if you leave it plugged in overnight (leaving the tool connected to an
electrical source all the time doesn't continuously charge it). Once
the battery is charged, disconnect the tool. If you're using your
computer to charge it, make sure that you disconnect your tool
correctly when it's finished charging.
3.7 DTC Lookup
The DTC Lookup function is used to search for definitions of DTCs
stored in the DTC library and for code breaker information.
1) From Main Screen (Figure 3.1), use the UP/DOWN scroll button
and LEFT/RIGHT scroll button to select DTC Lookup and
press the OK button.
Figure 3.1