User's Manual

Table Of Contents

- 9 -

LIPROMA3-00

- 10 Receiving unit -

RECEIVING UNIT

External

signalling The POWER light indicates the presence (on) or not (off) of the power supply in the

receiving unit

The ENABLE light indicates that the connection between the transmitting unit and the

receiving unit is enabled (on) or disabled (off).

When the receiving unit is powered, proper operation is indicated when:

- POWER and ENABLE lights on, with transmitting unit on;

- POWER light on and ENABLE off, with transmitting unit off.

Internal

signalling The LEDs that are present show when a relay has activated: when a LED switches on,

this indicates that the relative command relay given in the following drawing (also

present inside the receiving lid cover) has been activated:

SAFETY

The radio remote control is equipped with a safety function called SAFETY which pro-

tects the system from involuntary movements caused by possible radio remote con-

trol faults.

This function constantly controls the rest position (neutral) of the movement actua-

tors in the transmitting unit and is available on the receiving unit SAFETY relay out-

put.

antenna

POWER light

ENABLE light

connecting plug

identification plate

technical data plate

closing screws

POWER light

ENABLE light

RI97-08PVZA module

fuse F1 (POWER SUPPLY)

fuse F2 (STOP)

fuse F3 (SAFETY)

internal LEDs