User's Manual

LIKTCNA0Page 22
B.3 Replacement of the receiving module
Extract the receiving module
from the receiving unit.
Put the receiving module in the
appropriate fissure so that it fits
correctly into the connector.
Replace the receiving module.
If you replace the transmitting module you
have to:
- remove the address key from the module
to be substituted and put it in the new one
(see procedure B.6)
- programme the dip switches of the new
module in the same way as those on the old
model.
B.4 Replacement of the programming interface card
Disassembly Assembly
Carry out the disassembly
described in procedure B.3.
Follow the assembly
instructions in procedure B.3
Remove the programming
interface card from the receiving
unit and substitute it.
Put the programming interface
card in the appropriate fissure
so that it fits correctly into the
connector.
Disassembly
Carry out the opening described
in procedure B.1.
Assembly
Carry out the closure described
in procedure B.1.