User's Manual
Table Of Contents
- Pagina 1
- Pagina 2
- Pagina 3
- Pagina 4
- Pagina 5
- Pagina 6
- Pagina 7
- Pagina 8
- Pagina 9
- Pagina 10
- Pagina 11
- Pagina 12
- Pagina 13
- Pagina 14
- Pagina 15
- Pagina 16
- Pagina 17
- Pagina 18
- Pagina 19
- Pagina 20
- Pagina 21
- Pagina 22
- Pagina 23
- Pagina 24
- Pagina 25
- Pagina 26
- Pagina 27
- Pagina 28
- Pagina 29
- Pagina 30
- Pagina 31
- Pagina 32
- Pagina 33
- Pagina 34
- Pagina 35
- Pagina 36
LIKTCNA0 Page 21
B.2 Replacement of the transmitting module and/ or interface card
Disassembly
Carry out the opening described
in procedure B.1.
Assembly
Carry out the closure described
in procedure B.1.
Extract the transmitting module -
interface card sandwich.
Insert the antenna cable in the
transmitting module.
Unscrew the four screws and
separate the transmitting
module from the interface card.
Insert the transmitting module
interface card in the appropriate
fissure so that it fits correctly into
the connector.
Put the transmitting module and
the interface card together and
tighten the four screws.
Replace the transmitting module and/or the
interface card.
If you replace the transmitting module you
have to:
- remove the address key from the module to
be substituted and put it in the new one (see
procedure B.6)
- programme the dip switches of the new
module in the same way as those on the old
model.
Extract the antenna cable from
the transmitting module.