User's Manual

LIMJNMA0 5 - Warnings for maintenance Page 9 of 16
ROUTINE MAINTENANCE
The following instructions allow to maintain the radio remote control in a perfect
condition, guaranteeing it to function safely and correctly for a long period.
Special applications may need more specific routine maintenance interventions to
be carried out at different periods.
These instructions do not in any case substitute the norms and laws that regulate
work safety, nor do they limit the responsibility of the purchaser and user of the radio
remote control.
All given instructions must be followed correctly each time the machine and the ra-
dio remote control are started.
If irregularities are noted while carrying out routine maintenance, put
the "machine+radio remote control" system out of order, following
the indications given (see “Receiving unit diagnostic”)
Transmitting unit
It is recommended every day to:
1. remove dust or accumulations of other material from the transmitting unit. Never use sol-
vents or flammable/corrosive materials to clean, and do not use high pressure water clean-
ers or steam cleaners.
2. store the transmitting unit in clean and dry areas.
3. make sure that the transmitting unit gaskets, joystick bellows, selectors caps and push-
buttons are intact, soft and elastic
4. make sure that the battery seat and the battery contacts are always clean
5. make sure that the transmitting unit are structurally integral
6. make sure that the panel symbols can be easily recognised. If necessary, replace the
panel.
7. check identification plate readability and integrity
8. verify the efficiency of the STOP pushbutton before using the radio remote control.
!