User's Manual

Page 10 6 - Working mode of the LK transmitting unit LILKNPA1-01 - AmEn.fm
6 WORKING MODE OF THE LK TRANSMITTING UNIT
POWER ON AND START UP
1. To switch on the transmitting unit, insert
the starting keyswitch in the appropriate
slot.
2. To start the radio remote control func-
tions, press the START pushbutton for 1-2
seconds.
After starting, the green signalling LED al-
ways lights up.
COMMAND ACTIVATION
Activate the pushbuttons and/or
selectors related to any of the
movement or selection com-
mands to be carried out.
SIGNALS
TYPE MEANING ACTION
slow blinking NORMAL WORKING ///
fast blinking
*
* Red LED if present.
LOW BATTERY the transmit-
ting unit switches off 3.5 min-
utes after the LED starts
blinking
switch off the transmit-
ting unit and replace
the battery
steady light on starting*
ONE OR MORE (movement)
ACTUATORS and/or STOP
PUSHBUTTON are ACTI-
VATED
release all
actuators and/or the
STOP pushbutton
12