User's Manual

6
LK TRANSMITTING UNIT OPERATION
Page 9
LILKNPA0
LED SIGNALS
COMMAND
ACTIVATION
Operate the pushbutton
and/or the selector
actuators relevant to
whatever movement or
selection command is to
be carried out.
POWER ON AND STARTING
Switch on the transmitter unit by inserting
the key in the appropriate slot.
To start the radio remote control functions,
press the “START” button for 1÷2 seconds.
After starting, the green signalling LED
always lights up.
1
2
1
2
TYPE MEANING ACTION
Slow
flash
OPERATION
NORMAL
///
Fast
Flash (*)
LOW BATTERY
The transmitting unit
switches off 3,5 minutes
after the LED starts
flashing
Switch off the
transmitter unit
and replace the
battery
Steady light
on starting (*)
ONE OR MORE
(movement) ACTUATORS
and/or STOP
PUSHBUTTON
INSERTED
Release
actuator(s)
and/or the
STOP
pushbutton
(*) red led if present