User's Manual

9
If the “machine+radio remote control” system does not start, check if the problem is caused
by the radio remote control or the machine. Before carrying out any verifications, check the
functioning of the machine with the cable control panel:
- if it does not switch on, the problem lies with the machine itself
- if it does switch on, the problem lies with the radio remote control. In this case, proceed as
follows:
When START is
activated, is the red
LED lit steadily
and does the buzzer
sound?
The battery is
discharged:
replace it with one
that is charged.
Does the LED
continue flashing
and the buzzer
sounding?
NO
Clean the contacts
in the battery seat.
Does the LED
continue flashing
and the buzzer
sounding?
Does the green LED
blink?
YES
NO
NO
Does the red LED
blink and does
the buzzer sound?
NO NO
NO
MK10, MK12 TRANSMITTING UNIT DIAGNOSTICS
YES
YESYESYES
YES
Page 16
Is the led on with
a steady light?
Is the STOP
button or one
of the movement
actuator inserted?
Release it/them
If the problem
persists
CALL
TECHNICAL
ASSISTANCE
Carry out
diagnostics
checks on the
receiving unit.
LIMKPNA0