User's Manual

6
SIGNALS
To switch on the transmitting unit, insert
the starting key and turn it to "I".
To start the radio remote control functions,
press the “START” button for 1÷2
seconds.
After starting, the green signalling LED
always lights up.
MK10, MK12 OPERATION TRANSMITTING UNIT
POWER AND STARTING
COMMAND
ACTIVATION
Operate the actuators
and/or the selectors
relevant to whatever
movement or selection
command is to be
carried out.
Page 12
1
2
1
2
LIMKPNA0
TYPE MEANING
ACTION
blinking green LED
OPERATION
NORMAL
///
blinking red LED, accompanied
by intermittent sounds from the
buzzer
LOW BATTERY
The transmitting unit
switches off 3,5 minutes after
the LED starts flashing
Switch off the
transmitting unit and
replace the battery
steady red LED at starting,
accompanied by the continuous
sound from the buzzer
ONE OR MORE (movement)
ACTUATORS and/or STOP
PUSHBUTTON INSERTED
Release actuator(s)
and/or the STOP
pushbutton