User's Manual

AUTEC - Air series
Technical data 13
LIUSK4N00_eng-00
4 Technical data
Power supply (battery AIRBM3V7L) ....................................................................... 3.7V
Antenna .................................................................................................................. internal
Housing material .......................................................................................... PA 6 (20%fg)
Protection degree ....................................................................................... IP65 (NEMA 4)
Dimensions ................................................................ 138x60x118mm (5.43x2.36x4.65In)
Weight ....................................................................................................... 450g (0.992Lb)
Run time at 20°C (68°F) ............................................................................................ >16h
5 Technical Data Sheet
The Radio Remote Control 's Technical Data Sheet:
- describes the Transmitting Unit's con󰘰guration,
- indicates the relation between commands sent by the Transmitting Unit and those available
on the Receiving Unit.
The Technical Data Sheet must be 󰘰lled in, checked and signed by the Installer, who is
responsible for correct wiring.
A Technical Data Sheet must always be kept together with this Manual: if you need to use
the Technical Data Sheet for administrative purposes (tests, check, etc.), make a copy of it.
The wiring of the Receiving Unit's outputs must always re󰄉ect the wiring
indicated in the Technical Data Sheet.