User's Manual

40
LIUAIR001_eng-00
Instructions for the User
AUTEC - Air series
8.2.3 After using the Radio Remote Control
Switch o󰓐 the Transmitting Unit when not using the remote control to control
the Machine, or when work is otherwise interrupted, even for short periods.
Do not leave a load hanging or the Machine in dangerous conditions (even
when charging the Unit or changing the battery).
Never leave the Transmitting Unit unguarded in order to prevent unauthorised
or non supervised use.
If the Transmitting Unit has a "Key ID 0-1", always store it in a safe place
each time it is removed. If this key is lost, the Radio Remote Control cannot
work, since the Transmitting Unit needs the address stored in the key to
work with its Receiving Unit.
FAILURE TO DO SO CAN RESULT IN SERIOUS BODILY INJURY OR DEATH
AND/OR PROPERTY DAMAGE.
8.3 Operational use
The use of Radio Remote Controls is strictly limited to properly trained Personnel.
All instructions for correct use are given in "Part C" of the Manual (related to the Transmitting
Unit).
Environmental working conditions are given in the following table.
Temperature Relative Humidity Air pressure
Use
of the
Transmitting
Unit
from -20°C to +55°C
(from -4°F to +130°F)
d
from 4% to 100%
d
from 70kPa to 106kPa
d
Use
of the Receiving
Unit
from -20°C to +70°C
(from -4°F to +158°F)
d
d. Class 4K4H of standard EN50178.