User's Manual
20
LIUAIR001_eng-00
Radio Remote Control features
AUTEC - Air series
Never leave the Transmitting Unit unguarded in order to avoid uncertainty
about the availability or unavailability of the stop function.
The “life time”, as dened in international standards and requirements, of
the stop function is 20 years. In any case, the Radio Remote Control must
be replaced within this period. The “life time” may not be considered as a
warranty period.
After the activation of the STOP on the Transmitting Unit, the Machine is
not controlled by the Radio Remote Control any more. Any possible risks
that may arise from the activation of the stop function must be taken into
account by the Installer and the User of the Radio Remote Control, and by
the Manufacturer and the Owner of the Machine where the Radio Remote
Control is installed.
4.3 Technical data
Command response time (typical) .............................................................................140ms
Stop time (typical) ................................................................................................... 100ms
Max. stop time ............................................................................................................. 0.5s
Performance Level of the "stop protection" in compliance with ISO 13849-1 .............. PL d
The technical data related to the single Units belonging to the Air series are provided in the
specic parts of the Manual and in their Technical Data Sheet.
4.4 Identifying the Radio Remote Control
A serial number (S/N) univocally identies each Radio Remote Control.
The serial number is provided in the identication plate on each Radio Remote Control Unit.
This is the only reference to be used for maintenance operations and for any other situation
when you need to precisely identify the Radio Remote Control.
The serial number must be mentioned in any communication with Autec, its dealers, Installers,
Maintenance Technicians of the Radio Remote Control and with the people who, in any
capacity, need information, spare parts or technical data concerning the Radio Remote Control.
Plates on the Units must not be:
- removed from their position (removal voids the warranty),
- altered or damaged (contact Autec for replacement).