Instruction Manual

LIURPD002_eng-00AUTEC
17
9.2 Mounting and fa󰄋ening the Receiving Unit in the be󰄋 position
The Receiving Unit, if equipped with a plug, may be directly connected to the
electrical panel of the Machine by fa󰄋ening it through the locking levers on
the plug. It is recommended that adequate protection (e.g. a metal wire between
the Receiving Unit and the Machine) is arranged to prevent it from falling
should a release occur.
A
B
D
F
E
C
A Electrical panel of the Machine
B Metal housing of the socket
C Receiving Unit plug
D Machine socket
E Locking levers
F Receiving Unit