User's Manual

8
LIRNFE00-01
Operation
AUTEC - Air series
6.4 ERR LED (red)
The ERR LED indicates the status of the CAN communication.
The ERR LED... Meaning
…is o󰓐 The CAN communication is working correctly.
… blinks The CAN communication does not work correctly.
...is on No CAN communication.
ERR LED signals re󰘱ect the guidelines of the CANopen® standard, CiA recommendation 303-3.
7 Operation
7.1 Electronic module
The electronic module contains the address key, where the radio remote control con󰘰guration
data are also stored. The receiving unit cannot work without this address key.
7.2 DIP switches
DIP switch 1 is used to set the frequency band.
DIP switch 2 shall always be set in the OFF position: do not modify it.