User's Manual

AUTEC - Air series
Light signals 7
LIRNFE00-01
6 Light signals
6.1 POWER LED (green)
The POWER LED indicates the status of the receiving unit.
The POWER LED... Meaning
…is o󰓐 The receiving unit is switched o󰘯.
...is on Receiving unit is powered.
6.2 ENABLE LED (green)
The ENABLE LED indicates the status of the radio link.
The ENABLE LED … Meaning
… blinks once every 5 seconds The receiving and transmitting unit do not communicate.
… blinks fast
The unit is ready to receive commands sent by the
transmitting unit.
6.3 RUN LED (green)
The RUN LED indicates the status of the communication between the receiving unit and the
CAN network Master node.
The RUN LED... Meaning
…is o󰓐 The receiving unit does not work as a CAN network node.
… blinks
The receiving unit does not send commands in the CAN
network.
...is on
The receiving unit is working correctly as a node in the
CAN network.
RUN LED signals re󰘱ect the guidelines of the CANopen® standard, CiA recommendation 303-3.