User's Manual
4
LIAIRE12-00
Frequencies
AUTEC - Air series
The radio remote controls' working frequency is dened by market-specic
laws and standards. In order for the system “machine+radio remote control”
to be compliant and therefore to be used, it shall comply with such laws and
standards: if it does not, the system may be impounded by competent bodies.
Autec cannot be held responsible if the radio remote control is set with
forbidden frequencies.
They automatically search for a free working frequency.
2.1 Frequency band 433.050-434.790MHz
2.1.1 Frequencies
The radio link between the units of Autec AIR series radio remote controls is built at one of
the frequencies permitted by the European standards in force when the system is put on
the market.
Frequencies used in the band 433.050-434.790MHz ..................................................... 64
RF power ................................................................................................................ <1mW
Channel spacing ...................................................................................................... 25kHz
2.1.2 Market
Air series' radio remote controls working in the frequency band 433.050-434.790 MHz can
be used within the EU (European Union), the EFTA (European Free Trade Association), in
Australia and in Singapore.
2.2 Frequency band 915-928MHz
2.2.1 Frequencies
The radio link between the units of Autec Air series radio remote controls is built at one of
the frequencies permitted by the US, Canadian and Australian standards in force when the
system is put on the market.
Frequencies used in the band 915-928MHz ................................................................ 255
RF power (FCC and IC) ................................................... meets FCC and IC requirements
Channel spacing ...................................................................................................... 50kHz
2.2.2 Market
Air series' radio remote controls working in the frequency band 915-928MHz can be used in
the US, Canadian and Australian markets.
Check on the technical data plate of the units in which markets the radio remote control can
be used.