User's Manual

3 Warnings for installation
Besides instructions established by the machine's manufacturers, installers must always
observe the following warnings.
3.1 General
Respect and enforce the provisions of all reference standards relevant in
the concerned application eld (i.e. IEC 60204-32 for hoisting machines.)
Always follow the instructions provided in the technical data sheet and
respect values given in the technical data to carry out correct installation.
3.2 Mounting and fastening the receiving unit in the best position
Place the receiving unit so that it can be easily reached in case of need.
Place the receiving unit vertically, with the cable gland or plug facing down.
Fix the receiving unit in four points, using the specic holes in the housing.
Do not perforate the receiving unit in any case.
When installing on machines that vibrate, it is recommended to x the
receiving unit to the machine with the appropriate vibration dampers.
10
LIAIRE00-01
Warnings for installation
AUTEC - AIR SERIES