User's Manual

5.4.5 Special maintenance
Special maintenance consists of repairs needed due to radio remote control failure, damage
or malfunction, carried out with the aim of restoring the original usage and working conditions.
Prior to contacting the support service technicians:
- read and understand all documents related to the radio remote control, and
make sure that all the instructions they contain have been accomplished
correctly
- follow the instructions to detect possible malfunctions and their origins.
Any fault should be repaired by authorised personnel only (contact the
support service of the machine's manufacturer), using original Autec spare
parts only.
The following radio remote control data must be reported in order to make interventions
faster and more reliable:
- radio remote control serial number (S/N)
- purchase date (given on the certi󰘰cate of guarantee)
- description of the problem found
- address and telephone number of the place where the device is being used (with the
name of the person to contact)
- local supplier.
5.5 Machine maintenance
Follow instructions provided by the machine manufacturer and by the installer of the radio
remote control, in order to carry out machine maintenance.
Disconnect all receiving unit's electrical connections whenever machine
maintenance is carried out (i.e. when soldering).
When carrying out maintenance on the machine, always disconnect power
supply from the receiving unit.
5.6 Disposal
When disposing of a radio remote control, give it to the waste separate collecting services
in the user's country.
20
LIAIRE00-02
Radio remote control life cycle
AUTEC - AIR SERIES