User's Manual

Risk assessment 33
Staff training
LIUAIR1AE3-01.fm
AUTEC - AIR series
Assessment shall be made to establish possible additional protection measures for the actu-
ators (i.e. commands requiring two-hand operation, “dead-man” function) if particular envi-
ronments, equipment and working modes could cause accidental bumps to the actuators.
3.2 Staff training
All installation, usage and maintenance operations must be carried out by qualified techni-
cians who are suitably trained with respect to:
- warnings resulting from risk assessment
- regulations and reference laws
- instructions and warnings provided in the documents related to the industrial radio remote
control and to the radio remote controlled machine
- instructions provided by those who install the radio remote control on the machine and by
the person in charge for workplace safety where the system machine+radio remote control
is used.
3.3 Working conditions
To guarantee correct radio remote control operation, all current regulations regarding safety
at work and accident prevention should be respected. All applicable standards and regula-
tions valid in the user country regarding the use of both the machine and the radio remote
control must always be respected.
Autec cannot be held responsible if the radio remote control is used in unlawful work-
ing conditions.