User's Manual

12
LIAIRE02-03
Warnings for installation
AUTEC - Air series
Fixthereceivingunitinfourpoints,usingthespeci󰄈cholesinthehousing.
Do not perforate the receiving unit in any case.
Wheninstallingonmachinesthatvibrate,itisrecommendedto 󰄈xthe
receiving unit to the machine with the appropriate vibration dampers.
3.3 Positioning the antenna
If this warning is disregarded, the radio remote control working range may be reduced.
The antenna is inside the receiving unit. Hence, install the receiving unit
towards the working area, so that shields, structures or materials do not
obstruct the radio link. In particular, the receiving unit must be placed at
least 50 cm far from metal objects in its surroundings and never inside
closed metal containers.