User's Manual

ManualsBrandsAutec ManualsElectronicsRemote control - fixed unit

Table Of Contents

Original instructions

AIR SERIES

Part D: receiving unit G

ACRS13-G

DCRS13

INDEX

1 Description .............................................................................................................. 2

2 Technical data ......................................................................................................... 3

3 Technical data sheet ............................................................................................... 3

4 Plates ....................................................................................................................... 4

4.1 Plates on ACRS13-G and DCRS13 unit in a radio remote control ...................... 4

4.2 Plates on ACRS13-G and DCRS13 unit in a Take & Release system ................ 4

4.3 Plates on ACRS13-G and DCRS13 unit in a Multi Units or Multi Receiver system

5 Light signals ............................................................................................................ 5

6 Operation ................................................................................................................. 6

6.1 Electronic module .............................................................................................. 6

6.2 DIP switches ...................................................................................................... 6

6.3 Internal light signals ........................................................................................... 6

6.4 Command outputs .............................................................................................. 6

7 Malfunction signalled by the receiving unit .......................................................... 7

AUTEC LIRGAE00-01

Summary of content (8 pages)

PAGE 1
Original instructions AIR SERIES Part D: receiving unit G ACRS13-G DCRS13 INDEX 1 2 3 4 5 6 7 Description............................................................................................................... 2 Technical data.......................................................................................................... 3 Technical data sheet................................................................................................ 3 Plates........................................
PAGE 2
1 Description Description LIRGAE00-01 A POWER LED B ENABLE LED C Technical data plate D Identification plate E Cable gland A Digital inputs B Electronic module and address key C DIP switches D Internal light signals E STOP outputs F SAFETY outputs G Fuses of STOP circuit H Fuses of SAFETY circuit K Connector for power supply unit J F1: power supply fuse L Command outputs AUTEC - AIR SERIES
PAGE 3
Technical data 2 3 Technical data Power supply .................................................................. 45-240V (max 40-264V 0.4A) ......................................................................................... or 12-24V (max 9-30V 1A) Fuse F1 .......................................................................................... 1.6A T 250V (5x20mm) Digital inputs voltage .................................................................... 10-60V (max 9-66V ) Antenna ............
PAGE 4
Plates 4 Plates 4.1 Plates on ACRS13-G and DCRS13 unit in a radio remote control Plate radio remote control identification plate technical data plate 4.2 Position Content On the cover of the receiving unit Radio remote control serial number (SERIAL N.), bar code and manufacturing year. On the cover of the receiving unit MODEL, TYPE and main transmitting unit technical data, marking and possible radio remote control marks.
PAGE 5
Light signals 5 4.3 Plates on ACRS13-G and DCRS13 unit in a Multi Units or Multi Receiver system Plate Content system identification plate On the cover of the receiving unit System serial number (MULTI S/N), bar code and manufacturing year. receiving unit identification plate On the cover of the receiving unit The serial number of the receiving unit (SERIAL N.) and a bar code.
PAGE 6
Operation 6 Operation 6.1 Electronic module The electronic module contains the address key, where the radio remote control configuration data are also stored. The receiving unit cannot work without this address key. 6.2 DIP switches DIP switch 1 is used to set the frequency band. DIP switch 2 shall always be set in the OFF position: do not modify it. 6.3 Internal light signals The activation of each relay on the mother board is signalled by an LED near the relay. 6.
PAGE 7
Malfunction signalled by the receiving unit 7 7 Malfunction signalled by the receiving unit Use the light signals on the receiving unit to identify the radio remote control malfunction. If the problem persists after the suggested solution has been carried out, contact the support service of the machine manufacturer. LED Signals Solutions The connecting plug between the radio remote control and the machine is not connected correctly. Correctly plug in the connecting plug. Fuse F1 is damaged.
PAGE 8