User's Manual

Visually and directly follow all movements of the machine and its load and
remain inside the radio remote control working range.
Pay particular attention to warnings and visual and acoustic signals, and
take all measurements and steps to avoid that movements of the remote
controlled machine may lead to hazardous situations for people and/or
property.
Incaseofmalfunction,disablethesystem“machine+radioremotecontrol”
until the problem has been completely solved.
Pay attention to the low battery signals. The A8 unit cannot be used during
the charging process; all dangerous operations (i.e. hanging load) must
thereforebebroughttoanendbeforethebatteryiscompletely󰄉at.
Use the transmitting unit in a simple and comfortable way, avoiding accidental
falls. The pouch supplied with the radio remote control is used for this
purpose.
4.3 After using the radio remote control
Switch off the transmitting unit when work is stopped or temporarily
interrupted. Do not leave the load hanging (even while recharging the unit).
Never leave the transmitting unit unattended if it is on.
AUTEC - AIR SERIES
Warnings for use 15
LIAIRE00-02