User's Manual

LI14CAA0-00 - AmEn.fm 3 - Receiving unit Type R402 Page 5
3 RECEIVING UNIT TYPE R402
The receiving units Type R402 can be used with the transmitting units of the following se-
ries:
- LIGHT SERIES
- MODULAR SERIES
These receiving units are equipped with a safety function called SAFETY that pro-
tects the system “machine+radio remote control”, when it is in neutral (rest) posi-
tion, from unintended movements caused by possible radio remote control faults.
For this to happen, both the wiring instructions in the technical data sheet and the
recommendations for correct installation included in the following manual have to be
respected.
A
B
C
D
E
F
G
HL
A cable gland (opt. plug) D POWER/ENABLE light
B identification plate E antenna
C technical data plate
DRILLING TEMPLATE
F
= 5.8” (148 mm)
G
= 4.6” (116 mm)
H
= 10” (253 mm)
L
= 10” (253 mm)
The mother board of this receiving unit is the E16B14AC board for configurations up to 14
commands. This number can be modified using the bus E16RI02_ board.
F5
F4
F3
F2
F1
F1
POWER SUPPLY
protection fuse
F2
F3
STOP circuit protection fuses
F4
F5
SAFETY circuit protection fuses