User's Manual

LI14CAA0-00 - AmEn.fm 2 - Introduction Page 3
Autec cannot be held responsible if the radio remote control is installed on applica-
tions that are different from those permitted:
PERMITTED USES
Hoisting machines (construction cranes, bridge cranes, machines for material
handling in general,…).
FORBIDDEN USES
Machines installed in areas where equipment with explosion-proof character-
istics is required.
Machines for moving, raising and transporting people.
All machines must undergo a risk analysis: it is therefore necessary to evaluate, within the
limits of this analysis, if the machine can be radio remote controlled.
The machine producer and/or the person who decides upon radio remote control use and
installation is responsible for this analysis.
Autec cannot be held responsible if the risk analysis is not carried out correctly.
To guarantee correct radio remote control operation, all current regulations regarding safety
at work and accident prevention should be respected. All applicable standards and regula
-
tions valid in the user country regarding the use of both the machine and the radio remote
control MUST ALWAYS be respected.
Autec cannot be held responsible if the radio remote control is used in unlawful
working conditions.
System must be installed by a licensed technician and in accordance with all rele-
vant local, state/provincial and federal regulations, including but not limited to NEC,
OSHA, CE etc.
In case of malfunction and/or emergency, disable the system “machine radio
remote control” until the problem has been completely solved.
Any damaged part can ONLY be replaced by authorized Autec personnel or service
representative, and ONLY using original Autec spare parts.
2.2 DOCUMENTATION
Documentation enclosed with each radio remote control includes at least the following:
- transmitting unit manual
- receiving unit manual
- battery charger manual
- certificate of guarantee
- technical data sheet.
Make sure that such documents have been supplied: if they are not, please request
them from Autec or an authorized representative, specifying the product serial num
-
ber.