User's Manual

WARNINGS FOR MAINTENANCE
5
The correct operation of SAFETY function must be checked every six months. The
check can be carried out by inspection of the correct operation of the SAFETY
relay when a movement command is activated.
The receiving unit requires no special
maintenance, but some simple things are
necessary to work with apparatus that is always
reliable and safe:
- check for signs of damage,
- remove dust or any other material that has
deposited on the receiving unit with a cloth that has
been dampened with water (never use solvents or
flammable/corrosive materials to clean, and do not
use high pressure water cleaners or stream
cleaners).
SERV
ICE
!
ALWAYS ENSURE THAT THE RECEIVING
UNIT HAS BEEN DISCONNECTED FROM THE
POWER SOURCE BEFORE CARRYING OUT
ANY MAINTENANCE WORK.
All the faults should be repaired by authorised
Autec personnel using original Autec spare
parts only.
!
In order to close the
receiving unit,
tighten the
upper two screws
first and then the
lower two.
LIE&LDA0
Page 10
AUTHORIZED SERVICE CENTER
When it is necessary to carry out special maintenance (radio remote control repair and
replacement of damaged or faulty parts), do not contact anyone other than our
Authorized Service Center. In order to make the intervention faster and more reliable,
please help us identify the radio remote control correctly and completely by giving:
- the serial number
- the purchase date (given on the guarantee)
- description of the problem found
- the address and telephone number of the place where the radio remote control is being
used
- the name of the person to be contacted
- the name of the company that supplied the radio remote control.
Before speaking with a service technician, it is advisable to make sure that the
given instructions have been followed correctly.
DISPOSAL
Entrust the radio remote control and the its battery to the separate scrap collecting
services in the user country.