User's Manual

The installer must CHECK and/or COMPLETE the "Technical Data Sheet" indicating the
date of activation of the system, putting his signature and stamp.
WARNING: The stylus of dedicated antenna (always present in the receiving unit
Type R302, optional for the receiving unit Type R202), must never come in contact
with metal parts.
If installing on machines that vibrate, it is advisable to fix the receiving unit to the machine
with the appropriate antivibration absorbers.
The receiving unit should also be positioned away from heat sources (for example
motor/exhaust pipes).
LIE&LDA0
Page 9
!
When welding on the machine, REMOVE POWER SUPPLY by
disconnecting all the electric connections (both during installation and
during normal operation).
If present, the switch that is enable to open the ground (e.g. battery
negative) MUST OPEN also the receiving unit ground as well.