User's Manual

DIP SWITCHES ON MASTER BOARDS
There are a number of dip switches on the E16B16AC and E16B22AC master boards for
programming various functions of the radio remote control, as explained in the following
tables:
DIP SWITCHES ON E16B16AC MASTER BOARD
DIP SWITCHES ON E16B22AC MASTER BOARD
* With the LK, VEGA E transmitting units the dip switch is not used and should be at OFF.
** With the LK transmitting units the dip switch is not used and should be at OFF.
*** E4 and E can be disconnected simply by activating them in the reverse order (after you have activated E2 (or E1)
and, therefore, maintained by E2 (or E1)). The same is true for E8 and E7 with E5 (or E6).
* With the LK transmitting units the dip switch is not used and should be at OFF.
** With the SIRIO E transmitting units the dip switch is not used and should be at OFF.
*** E4 and E3 can be disconnected simply by activating them in the reverse order (after you have activated E2 (or E1)
and, therefore, maintained by E2 (or E1)). The same is true for E8 and E7 with E5 (or E6).
With the MK10 and MK12 transmitting units the dip switches are not used and should all be at OFF.
LIE&LAA0
Page 15
DIP
SWITCH
POS.
SEL.
DESCRIPTION
1 ON E8 activate also E7
1 OFF function disabled *
2 ON E10 activate also E9
2 OFF function disabled **
3 ON E3 held by E2 (or E1) and E4 by E3 ***
3 OFF function disabled
4 ON E7 held by E5 (or E6) and E8 by E7 ***
4 OFF function disabled
DIP
SWITCH
POS.
SEL.
DESCRIPTION
1 ON E10 activate also E9
1 OFF function disabled *
2 ON E12 activate also E11
2 OFF function disabled
3 ON E14 activate also E13
3 OFF function disabled
4 ON E16 activate also E15
4 OFF function disabled
5 ON E18 activate also E17
5 OFF function disabled
6 ON E20 activate also E19
6 OFF function disabled
7 ON E3 held by E2 (or E1) and E4 by E3 ***
7 OFF function disabled **
8 ON E7 held by E5 (or E6) and E8 by E7 ***
8 OFF function disabled **