User's Manual

Page 7
4
WARNINGS FOR INSTALLATION
LIE&LQA0
!
Installation should only be carried out by qualified people and in
accordance with installation country rules.
THE INSTALLER
MUST
FAILURE TO COMPLY WITH THE ABOVE WARNINGS MAY RESULT IN
SERIOUS INJURY OR DEATH TO PERSONNEL AND DAMAGE TO
EQUIPMENT.
MOUNT the receiving unit so that the output terminal blocks always
faces upwards.
DO NOT MODIFY or TAMPER WITH the radio remote control, the
machine or its electric systems. DO NOT PERFORATE the receiving unit
for any reason whatsoever.
CHECK that the receiving unit power supply is inside the voltage range
given in the “Technical Data”, and that the voltages and currents being
used do not exceed the maximum permitted values.
DO NOT EXCLUDE the radio remote control safety mechanisms and/or
those present inside the machine.
RESPECT the (for hoisting machines) and/or
(for machines).
NEVER SUPPLY the receiving unit directly from the mains. A switch
should always be present to permit isolation of the system for service.
INSTALL the receiving unit always inside electric cabinets.
USE electric cabinets that guarantee a protection level of IP54 or higher
(level IP65 is recommended if the cabinet is outdoors).
INSTALL the receiving unit away from devices that generate
electromagnetic fields (e.g. transformers).
REMEMBER to carefully wire the SAFETY contacts in series with the
movement commands inside the receiving unit.
After installation and wiring, ALWAYS CHECK that the maneuvers
carried out are exactly the same as the commands given (in particular
check the STOP command).
EN60204-32 EN60204-1
prescriptions