User's Manual

Page 13
ANTENNA ASSEMBLY
7
Insert the antenna cable into the connector on the
receiving unit (see photo 1) and fit the antenna on a
metallic surface (e.g. electric panel, bracket . . .)
(see photo 2).
An antenna must be installed outside the electric cabinet to ensure a reliable radio link
from the transmitting unit to the receiving unit.
antenna
cable
antenna
stylus
2
metallic
surface
1
antenna
cable
LIE&LQA0
!
The antenna must only be assembled by qualified technicians.
The antenna stylus should never come into contact with metallic parts.