User's Manual

INSTALLATION
6
Page 12
If installed inside an electric cabinet, the receiving unit must be installed exclusively
on DIN EN 60 715 rail (ex DIN EN 50 022). Follow instructions below for easy and fast
assembly and disassembly.
Clip the upper part of the receiving unit
over the DIN rail.
ASSEMBLY
Using a screwdriver, push the hook on the
base of the receiving unit downwards until
the receiving unit pushes easily onto the
DIN rail.
DISASSEMBLY
Using a screwdriver, push the hook on the base of the receiving unit downwards until the
receiving unit is released from the DIN rail.
LIE&LQA0