User's Manual

AUTEC - Dynamic Series
Malfunction signalled by the receiving unit 7
LIPCRE00-00
Signals Possible reason Solutions
The STATUS LED blinks
slowly.
Over-voltage on power supply.
Make sure that the receiving
unit power supply is within the
voltage limits provided in the
technical data.
The STATUS LED blinks fast
and irregularly.
The receiving unit loses some
data sent by the transmitting
unit.
Bring the transmitting unit
closer to the receiving unit.
If this signal persists, contact
the support service of the
machine manufacturer.
The STATUS LED is on.
Over-current in one of the
PWM analogue outputs.
Contact the support service of
the machine manufacturer.