User's Manual

AUTEC - Dynamic Series
Technical data 3
LIPCRE00-00
2 Technical data
Power supply ........................................................................................................ 8-30V
Antenna .............................................................................................................. dedicated
Rated current of STP_1 and STP_2 outputs .................................................... 2A (30V )
Rated current of the SAF_1 output .................................................................. 2A (30V )
Rated current of the SAF_2 output .................................................................. 2A (30V )
Rated current of digital outputs ........................................................................ 2A (30V )
Rated current of analogue outputs (PWM) ....................................................... 2A (30V )
Rated current of analogue outputs (voltage) ............................................... 10mA (28V )
Protection of power supply (resettable fuse) ............................................................... 1.3A
Protection of outputs (fuse F1) ....................................................... 10A (32V , autofuse)
Protection of the SAF_1 output (fuse F2) .......................................... 3A (32V , autofuse)
Protection of the STP_2 output (fuse F3) .......................................... 3A (32V , autofuse)
Protection of the SAF_2 output (fuse F5) .......................................... 3A (32V , autofuse)
Protection of the STP_1 output (fuse F4) .......................................... 3A (32V , autofuse)
Housing material ................................................................................................ aluminum
Protection degree ....................................................................................... IP65 (NEMA 4)
Dimensions .................................................................... 260x160x70mm (10.2x6.3x2.7In)
Weight ............................................................................................................. 2kg (4.4Lb)
3 Technical data sheet
The technical data sheet contains the wiring diagram showing the connection between the
receiving unit and the machine. It also contains the transmitting unit con󰘰guration and shows
the matching between commands sent and machine functions/movements.
Each technical data sheet must be 󰘰lled in, checked and signed by the installer, who is
responsible for a correct wiring.
A technical data sheet must always be kept toghether with this manual (always keep a copy
of the technical data sheet when it is used for administrative purposes).
The wiring of the receiving unit outputs must always re󰄉ect the wiring
indicated in the technical data sheet.