User's Manual

26
LIDYNE00-05
Operation
AUTEC - Dynamic series
6.3 START pushbutton
The START pushbutton is used to:
- start up the radio remote control (see paragraphs 5.1, 5.4 and
5.5)
- activate the horn when the radio remote control is started.
6.4 STOP pushbutton
The STOP pushbutton should be pressed when it is necessary to immediately
stop the machine when a dangerous condition occurs.
When the STOP pushbutton is pressed, the machine stops (active
stop: see paragraph 1.6.1), and the transmitting unit switches o󰘯.
To start working again after the STOP pushbutton has been
pressed:
1. make sure that the working and usage conditions are safe
2. turn the STOP pushbutton in the arrow direction to unlock it
3. start up the radio remote control (see paragraph 5.1).