Instruction Manual

8.2 Warnings for the User
The User must:
- observe and comply with all instructions and warnings provided by the Machine
Manufacturer;
- observe and comply with all instructions and warnings provided by the Installer;
- observe and comply with all instructions and warnings provided by the Person responsible
for the Machine commissioning or making the Machine available for work;
- observe and comply with all instructions and warnings provided in the Radio Remote
Control Manual;
- observe and comply with all applicable Laws, Regulations and Standards, even local.
- operate the Autec Radio Remote Control only in accordance with this Manual and all
of its Parts, and with all Autec warnings and instructions, and with applicable Laws,
Regulations and Standards,even local;
- operate the Machine operated by or through the Autec Radio Remote Control only in
accordance with the Machine Manufacturer’s instructions and warnings, and with applicable
Laws, Regulations and Standards, even local;
- operate the Machine operated by or through the Autec Radio Remote Control only when
he is in a safe condition and can perfectly see the whole Machine's working area;
- immediately inform his supervisors and/or the people in charge for the working place
and/or for the Machine about any possible failure, damage, loosening, anomalous wear,
detachment and/or any other anomaly that may cause malfunction to the Radio Remote
Control and/or to the Machine, or that may cause damage to people and/or property;
- keep the Transmitting Unit secure and out of reach of unauthorized and unquali󰘰ed
Personnel.
The User must not:
- use the Radio Remote Control without Receiving prior complete training by quali󰘰ed
Personnel, and if he does not completely master the instructions and warnings regarding
the Radio Remote Control usage;
- use the Radio Remote Control if he suspects malfunction on the Radio Remote Control,
the Machine, or one of their components;
- use the Radio Remote Control if the warnings and labels on the Machine or the symbols
on the Radio Remote Control cannot be read, are worn or dirty;
- allow the use of the Radio Remote Control to unauthorised and/or untrained Personnel.
ADDITIONAL WARNINGS AND INSTRUCTIONS THAT ARE CONTAINED IN
THE OTHER PARTS OF THIS MANUAL MUST BE FOLLOWED.
AUTEC - AIR SERIES
Instructions for the User 39
LIUAIR003_eng-00