Instruction Manual
Never leave the Transmitting Unit unguarded in order to avoid uncertainty
about the availability or unavailability of the stop function.
The “life time”, as dened in international standards and requirements, of
the stop function is 20 years. In any case, the Radio Remote Control must
be replaced within this period. The “life time” must not be considered as
a warranty period.
After the activation of the STOP on the Transmitting Unit, the Machine is not
controlled by the Radio Remote Control any more. Any possible risks that
may arise from the activation of the stop function must be taken into account
by the Installer of the Radio Remote Control, and by the Manufacturer and
the Owner of the Machine where the Radio Remote Control is installed.The
Radio Remote Control User must be properly trained about this.
In some Radio Remote Controls, the stop function may be appointed to a specic
actuator, supplied on demand (“Enabling&Stop” pushbutton). The instructions
for this actuator, if present, are provided in “Part C” of the Instruction Manual.
4.3 Technical data
Command response time (typical) .............................................................................140ms
Stop time (typical) ................................................................................................... 100ms
Max. stop time ............................................................................................................. 0.5s
Performance Level of the "stop protection" in compliance with ISO 13849-1 .............. PL d
The technical data related to the single Units belonging to the Air series are provided in the
specic parts of the Manual and in their Technical Data Sheet.
AUTEC - AIR SERIES
Radio Remote Control features 21
LIUAIR003_eng-00