User's Manual
8
LIAIRE02-02
Radio remote control description
AUTEC - Air series
1.7 Protection against unintended movements from the rest position
This function protects the system “machine+radio remote control” from unintended movements,
namely machine movements not activated intentionally by the user, but resulting from possible
electrical and mechanical failure of the radio remote control.
Such function checks the neutral (rest) position of the actuators that control the machine's
movements. Each time one of those actuators is operated, the transmitting unit sends both
the movement command and the “SAFETY” command.
1.8 Identifying the radio remote control
As required by standard IEC 60204-32, each radio remote control is uniquely identied through
a serial number (SERIAL N. or S/N).
The serial number is provided in the identication plate on each radio remote control unit.
This is the only reference to be used both for maintenance operations and for declarations
to competent bodies.
Plates on the units must not be:
- removed from their position (removal will invalidate the guarantee)
- altered or damaged (contact Autec for replacement)