Instruction Manual

LIUDP1004_eng-00AUTEC
13
3 Conformity
Addressees of in󰘵ructions mu󰘵:
- Make sure that the Radio Remote Control works within the frequency band permitted in the
country where it is used.
- Make sure that the Radio Remote Control works correctly, in compliance with the applicable
󰘵andards in the relevant country.
- Not modify the Radio Remote Control conformity, by performing modi󰘰cations or technical
operations that change its operation.
During training on or usage of Autec Radio Remote Controls, local provisions imposing the
conservation of product conformity with local 󰘵andards mu󰘵 be respected, as well as specific
󰘵andards related to safety in the use of Radio Remote Controls or electrical devices, both in
the working environment or outside of it.
3.1 EC conformity
According to the regulations in force in the European Union, one of the
requirements for a Radio Remote Control to be compliant with the EC
conformity is to work at one of the permitted frequencies. If it does not, the
Radio Remote Control cannot be considered compliant.
Each Dynamic+P series' Radio Remote Control working in the 863-870MHz
frequency band is in compliance with the essential requirements and other
relevant provisions of the RED Directive (2014/53/ EU, Annex II).
Each Radio Remote Control also complies with the harmonised 󰘵andards
li󰘵ed in the EU Declaration of Conformity, that are in force and applicable
when the Radio Remote Control is put on the market.
Autec Radio Remote Control's EU Declaration of Conformity is provided
as an attachment with the Radio Remote Control.