Instruction Manual
LIUPJMV03_eng-00 AUTEC
22
8.4 EMS pushbutton
When the EMS pushbutton (if any) is activated, the Transmitting Unit
switches off and the Machine ops. To art the Radio Remote Control
again and enable it to control the Machine after the EMS pushbutton
has been pressed, you need to:
- Make sure that the working and usage conditions are safe.
- Turn the EMS pushbutton in the direction show by the arrow (see
button) to unlock it.
- Start the Radio Remote Control following the procedure described in
paragraph 8.8).
The EMS pushbutton should be pressed when it is necessary to op the
Machine immediately whenever a dangerous condition occurs.
The Machine Manufacturer and/or the Inaller mu provide the User with the
inructions and warnings concerning possible risks that may originate from
the Machine op (by way of example: movement inertia, swinging load…).
8.5 Pushbuttons for display/LED
4.3” display
A
D
E
C
B
A Red LED
B Green LED
C LEDs for Data Feedback function
D Display
E Keys
The pushbuttons [E] on the Transmitting Unit are used to interact with the display [D] and the
LEDs for Data Feedback function [C].
Functions performed by the pushbuttons [E] are configurable and are decided by
the Machine Manufacturer: the User mu be properly trained in this respect.
No operation or movement of the Machine shall be connected to the use of the
pushbuttons [E].