Instruction Manual
LIUPJMV03_eng-00AUTEC
21
8.2 START pushbutton
The START pushbutton is used to:
- art the Radio Remote Control (see paragraph 8.8)
- activate the horn when the Radio Remote Control is arted.
8.3 GSS pushbutton
When the GSS pushbutton (if any) is activated, the Transmitting Unit
switches off and the Machine ops. To art the Radio Remote Control
again and enable it to control the Machine after the GSS pushbutton
has been pressed, you need to:
- Make sure that the working and usage conditions are safe.
- Turn the GSS pushbutton in the direction show by the arrow (see
button) to unlock it.
- Start the Radio Remote Control following the procedure described in
paragraph 8.8).
The GSS pushbutton should be pressed when it is necessary to op the
Machine immediately whenever a dangerous condition occurs.
The Machine Manufacturer and/or the Inaller mu provide the User with the
inructions and warnings concerning possible risks that may originate from
the Machine op (by way of example: movement inertia, swinging load…).