Instruction Manual

LIUPJMV03_eng-00 AUTEC
20
8 General operating in󰄋ructions
8.1 Power keyswitch
The Transmitting Unit have a power keyswitch. It can either one of the following:
- Mechanical key (see paragraph 8.1.1).
- M-Key (see paragraph 8.1.2).
The Radio Remote Control cannot work if the power keyswitch is not inserted in the Transmitting
Unit.
8.1.1 Mechanical key
The mechanical key makes it possible to power the Transmitting Unit.
Inserting the mechanical key
Do the following to insert the mechanical key:
1. Insert the mechanical key into its receptacle.
2. Turn the mechanical key clockwise.
Removing the mechanical key
Do the following to remove the mechanical key:
1. Turn the mechanical key anticlockwise.
2. Pull the mechanical key to remove it from its receptacle.
8.1.2 M-Key
The M-Key makes it possible power the Transmitting Unit.
Inserting the M-Key
Push the M-Key to the bottom of its housing.
Removing the M-Key
Remove the M-Key from its housing by pulling the lanyard.