Instruction Manual
LIUPJMV03_eng-00 AUTEC
16
A delay occurs between the camera filming and the visualization of the filmed
images on the display on the Transmitting Unit. This delay cannot be removed
or reduced.
Depending on the display configuration set by the Machine Manufacturer or
by the Inaller, if the Wi-Fi connection between the access point and the
Transmitting Unit is interrupted, the la filmed image before the interruption
may remain displayed.
The Machine Manufacturer, the Inaller, the Owner, the User and/or the
Maintenance Technician, mu make sure that the delay between the camera
image filming and the display of the image on the Transmitting Unit display
cannot generate or contribute to generate a hazardous situation in the specific
working application.
3.2.2 Operation with LED
If the Transmitting Unit has an LED array for the Data Feedback function, specific Machine
conditions are signalled if they are illuminated (by way of example: load limits, limit switch).
The signalled conditions depend on the settings chosen by the Machine Manufacturer.
4 Technical data
Power supply batteryLPM04
Antenna integrated
Housing material PA 6 (20%fg)
Protection degree IP65 (NEMA 4)
Dimensions 310x220x220mm (12.2x8.7x8.7in)
Weight 2.5kg (5.5lb)
Run time at 20°C (68°F) 5.5h
Power frequency magnetic field immunity
according to CEI EN 61000-4-8
up to 300A/m