Instruction Manual
LIUPJMV03_eng-00 AUTEC
14
3.2 Data Feedback Function
Thanks to the Data Feedback function, the following is available to the User:
- Images lmed by cameras, related to the working area or to specic Machine movements.
- Information and/or signals concerning some specic situations and the movements of the
controlled Machine.
The Data Feedback function operates through the display and the LED array on the Transmitting
Unit.
During normal operation, pay particular attention to the images shown and
to the indications given on the display and/or on the LEDs on the Transmitting
Unit: they can be helpful to evaluate the Machine working atus, but they do
not replace nor exhau the necessary visual inspections the User needs to
carry out so that the Machine operation and movements are performed in
safety conditions.
Any image shown and any indication signalled on the display and/or through
the LEDs can never be considered or used as a safety signal or for legal
metrology.
When operating the Machine, remember that the Radio Remote Control does
not cut in autonomously when potential hazardous situations are shown and
signalled.
The display does not signal the presence of people, animals or belongings,
even if they appear in the cameras' frame, and does not signal the risk of hitting
people, animals or belongings.
3.2.1 Operation with display
The display on the Transmitting Unit shows the images filmed by the camera/s.
Signal icons, measurements collected from the Machine and their description may be shown
too.
The Machine Manufacturer chooses which information is displayed and the way they are
displayed (images and/or icons and/or measurements and/or descriptions).
In addition, the battery level and the quality of the radio link may also appear.
Images filmed by the cameras are transmitted to the PAU (Power & Acquisition Unit), that in
turn sends them to the Transmitting Unit through the access point.
The instructions and warnings for the cameras, the PAU and the access point are to be found
in the corresponding manuals that come with the single devices.