Instruction Manual

LIUPJMV03_eng-00AUTEC
25
8.6.5 Command TAKE
The TAKE command may be present in the Transmitting Units of a Take & Release Radio
Remote Control. The TAKE command enables to take control of the Receiving Unit, if it is free.
8.6.6 Command RELEASE
The RELEASE command is present in all the Transmitting Units of a Take & Release Radio
Remote Control. The RELEASE command enables to release the Receiving Unit, if it is engaged.
By releasing the Receiving Unit of a Take & Release Radio Remote Control,
the User gives an explicit consent to the other User, thus enabling him/her to
take control of the Receiving Unit that has ju󰄋 been released.
8.7 Battery
The Dynamic+P series' Transmitting Units can only be powered by Autec
rechargeable batteries.
For any warnings and in󰄋ructions regarding the battery, see "Part E" in the
In󰄋ruction Manual.
8.7.1 Battery insertion
To insert the battery, proceed as follows:
1. Push the battery towards the contacts of the Transmitting Unit.
2. Insert the battery in its housing.
The battery slides easily into place and ensures that the positive (+) and negative
(-) poles are correctly connected only if it is inserted with the plate facing its housing,
so that the battery's contacts match the Transmitting Unit's contacts.