Instruction Manual

LIUPJMV03_eng-00AUTEC
43
Green LED
Red LED
Activated command
Number of long
blinks
Number of short
blinks
On 3 2 H2
On 3 3 H3
On 3 4 H4
On 3 5 H5
On 3 6 H6
On 3 7 H7
On 3 8 H8
On 4 1 L1
On 4 2 L2
On 4 3 L3
On 4 4 L4
On 4 5 L5
On 4 6 L6
On 4 7 L7
On 4 8 L8
Whenever the red LED illuminates, the acou󰘵ic signal device activates.
The active command can even be identified through the display, if this feature has
been arranged by the Machine Manufacturer and or by the In󰘵aller.
Examples
If the red LED emits one long blink and twelve short blinks, the Transmitting Unit detected that
command D12 is activated.
If the red LED emits two long blinks and five short blinks, the Transmitting Unit detected that
command A5 is activated.
If the red LED emits three long blinks and two short blinks, the Transmitting Unit detected that
command H2 is activated.
If the red LED emits four long blinks and one short blink, the Transmitting Unit detected that
command L1 is activated.
12 Decommissioning and disposal
Instructions for correct decommissioning and disposal of Radio Remote Controls are described
in chapter "Decommissioning and disposal" in "Part A" of the Instruction Manual. Therefore,
please refer to that part of the Manual.