Instruction Manual

LIUPJMV03_eng-00 AUTEC
42
11.2 Identifying the activated command
If the green LED is illuminated, at lea󰘵 one of the commands A1-A8, D2-D20, H1-H8 and L1-L8
is activated during the Radio Remote Control 󰘵art up.
You can identify the activated command by observing the long blinks followed by short blinks
emitted by the red LED, as described in the table below.
Green LED
Red LED
Activated command
Number of long
blinks
Number of short
blinks
On 1 2 D2
On 1 3 D3
On 1 4 D4
On 1 5 D5
On 1 6 D6
On 1 7 D7
On 1 8 D8
On 1 9 D9
On 1 10 D10
On 1 11 D11
On 1 12 D12
On 1 13 D13
On 1 14 D14
On 1 15 D15
On 1 16 D16
On 1 17 D17
On 1 18 D18
On 1 19 D19
On 1 20 D20
On 2 1 A1
On 2 2 A2
On 2 3 A3
On 2 4 A4
On 2 5 A5
On 2 6 A6
On 2 7 A7
On 2 8 A8
On 3 1 H1